주요 콘텐츠로 건너뛰기

A 50-inch display has a diagonal measurement (from upper left-hand corner to lower right-hand corner) of 50 inches.

12 질문 전체 보기

Panasonic TC-P50ST50 Plasma won't turn on

Was watching on my Panasonic TC-P50ST50 plasma TV when it suddenly turned off. Tried turning it back on and it froze at the "Viera" logo startup screen, and it would not turn off with the remote. Tried unplugging it and replugging it; now it doesn't turn on at all. The red light will turn on when plugged in, and after dormant for a while the remote power button will turn the red light on again. But nothing appears on the screen, I can't bring up any menus with the remote, and neither the remote nor the TV power button will turn off the red light. I tried unplugged 60 secs holding TV power button, plugged in 20 secs holding TV power button, 30 secs plugged in holding TV power and a volume button, and 30 secs plugged in holding TV power and remote power buttons. I heard a click with some of those, but otherwise they didn't change the situation at all. Any suggestions or is it finally dead (been 12+ years now)?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Hi @jjlwashdc

Here's the troubleshooting service manual for the TV that may help.

Go to p.30 to view the Troubleshooting No Power/Dead Unit (Power LED is Off) flowchart and check if following that will help to find out what's wrong.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

JJLWashDC 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 31