I have a Model 796.4027. It comes up with an 'IE' error code. I don't see this in any links. The washer gets to the rinse cycle, motor seems to groan a little before rocking drum 1/4 turn. Timer stays put. Eventually times out with 'IE' code. We end up restarting, sometimes with drum full of water. It usually cycles through on second run through.
ANY HELP?
좋은 질문 입니까?
평판: 450.2k
11
367
1.4k
Hi @cb3lazybw
You washer is a rebadged LG model made for Kenmore. This is based on that it is made up from only LG parts
Here's a link that shows what to check when you have an IE error code in LG machines that may help.
If everything mentioned in the link is OK, perhaps try selecting a cold or hot only wash to see if it still occurs.
If it only happens on one temperature and not the other it may be a faulty water inlet valve in the washer.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 5
30일 전: 40
전체 시간: 78
