옵션

power port on chassis loose

Hi.

The port to plug my ac adapter into is loose. whenever I go to plug it in, the plug always falls out. I've checked why, and it appears that I've broken the foundation it was attached to.

I can still charge, so that's not the issue.

What can I do to reconnect it to the "base" it's attached to, so it won't constantly fall out?

I'm guessing this has to do with opening the case, and getting down to the motherboard. As well as either some soldering, etc....

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 3개

Please give the last three figures of your serial number.

mayer 의 2012년 3월 26일

the last 3 of the SN is

RJ7

Steve 의 2012년 3월 26일

Apple PowerBook G4 1.5 12" (Al) Specs

Identifiers: 12-Inch - 1.5 GHz - M9690LL/A* - PowerBook6,8 - A1104 - 2030

mayer 의 2012년 3월 27일

댓글 달기

게시일: 2012년 3월 27일

옵션

The main problem is getting to the screw that holds the DC-IN board in place, here's the guide: PowerBook G4 Aluminum 12" 1-1.5 GHz DC-In Board Replacement

The screw is usually held in place with one screw and is covered by a piece of tape. It's about the last thing to be removed when tearing down this machine so you can actually superglue it into place along with using locktite to secure the screw.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 달기

PowerBook G4 Aluminum 12" 1-1.5 GHz

power port on chassis loose

답변 1개

귀하의 답변을 추가하세요