기기를 수리하세요 커뮤니티 상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

옵션

phone turns on shows apple logo and then goes blank with backlight on

As the title said my iphone 6s turns on shows apple logo and then goes blank with backlight on, I don't normally use it I only when I want to take something from it but since this years it is just like that.

I have used the apple recovering PC software to do a restore and update but it fails when the phone shows apple logo and brings up error ( 2009 ) also when I try to use third party recovery software for update and restore it also fails please do anyone have a solution to this or know what might have caused it.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Error code 2009 is a common error that can occur when you are trying to restore or update your iPhone using iTunes or Finder on a Mac. This error typically indicates a problem with the USB connection between your computer and your iPhone.

found on this apple forum.

https://discussions.apple.com/thread/255...

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 7개:

If you feel comfortable with opening the phone you can get a spare charge port and connect that to try isolating the issue from the phone. It might be the chargeport or the cable.

iPhone 6s Lightning Connector and Headphone Jack

iPhone 6s Lightning Connector Assembly Replacement

의

I also tried using a Mac to do the restore but it gave me error unknown (21) maybe I try what you suggested about changing lighting port

의

@anthonyakuta I would at least start there as a cheaper way of eliminating points of failure if you don't have another charging and data cable available.

https://support.apple.com/en-us/108308#h...

This link says it is a hardware issue. Something that gives me a feeling it can only be 2 different points of failure. cable or port.

의

I have used a different cable like 3 different ports both USB A port and type c port, and I still get the same error when it reboots and just stops at apple logo and pop ups error (2009) or (21 on Mac )

의

@anthonyakuta Have you changed the port on the phone?

의

댓글 2개 더보기

댓글 달기

귀하의 답변을 추가하세요

Anthony Akuta 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 53