기기를 수리하세요 커뮤니티 상점

Apple의 Arm 기반 M1 SoC(8코어 CPU 및 최대 8코어 GPU 탑재)를 탑재한 최초의 13인치 MacBook Air에 대한 수리 안내서, 지원 및 문제 해결 정보입니다. 2020년 11월에 출시되었으며 모델 번호 A2337 또는 EMC 3598로 식별됩니다.

175 질문 전체 보기

옵션

What’s causing these screen artifacts?

Hello Guys. I was just running a heavy ffmpeg render when suddenly the left side of my screen started with these weird lines. So at first I suspected I fried the GPU but they’re not visible on an external display (phew). What’s weird about these artifacts is that they’re not consistent. They‘re mostly gone but sometimes reappear and then disappear again. It doesn’t seem to be related to movements of the mac either. Could this be related to the flex cable or is my screen broken? Any help or insights are highly appreciated

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Rendering is often the heaviest of processing jobs your system is asked to preform and creates by far the most heat. While Apples M series SoC runs cooler than Intels CPU, Apple cut back on this series cooling as such you maybe expecting a bit to much from it.

Here we have the signs of the T-CON logic which is that dangling piece attached to the display that sits inside of the upper case. Review this image while not the best the silver shield area is the logic which has either over heated or the ribbon cables/LCD panel has failed. In any case replacement will be needed Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020)

Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020) 이미지

상품

Display Assembly Compatible with MacBook Air 13" (Late 2018-Early 2020)

$379.99

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Maximilian Maaßen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 7

전체 시간: 26