주요 콘텐츠로 건너뛰기

Apple은 MacBook Air 13"를 2017년 6월에 새로운 Broadwell Intel Core i5 프로세서로 업데이트하여 성능과 배터리 수명을 약간 향상시켰습니다.

423 질문 전체 보기

Trackpad not working after changing the battery

Hello,

after replacing the battery on my Macbook air 13, i noticed that the trackpad has stopped working, i wasn't careful enough during the replacemnt and i think i damaged some sort of chip

Block Image

on the trackpad (the one in blue square), now i've already bought another trackpad with the cables, i was wondering if there is a remote possibilty that this is a software issue. Thank you.

BTW the keyboard works fine.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

How it’s it not working? The tracking of your finger across it fails to show in the movement of the pointer on the screen? Or is it the click action when you press?

해당 답변은 도움이 되었습니까?

점수 0

댓글 4개:

Yes, nothing works, i can click it, i can finger across the surface, but the pointer won't even show up, i can only use the laptop with an external mouse, but the keyboard as i said works as intended.

@antoniovit99153 - I would replace the cable and make sure the ZIF connector latch is correctly set (currently in the unlatched state as the cable is not present) once the cable is threaded into the slot fold it back down.

the pic presented is a stock pic from i fix it, i wasn't able to took a pic before closing the lid, the latch, the cable all seemed not affected, only that chip was a little bit damaged on top

@antoniovit99153 - Let’s get a picture of your trackpad where the damage is.

댓글 달기

Well I will suggest you to check out the following: https://discussions.apple.com/thread/252...

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

they say to change the afflicted items and that's what i've done

댓글 달기

귀하의 답변을 추가하세요

Antonio Vitagliano 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 24

전체 시간: 24