How to repair loose connection in iGhost iPod Docking Station?

Sounds like the solder under the connector (or attaching it to the logic board) is cracked. Soldering these parts requires special solder and equipment and it's easy to destroy the logic board. SOMETIMES if you can smear some flux around the join and apply heat it will "reflow" this is a temporary repair as solder is brittle like any metal and can scale with heat. You might try placing a USB A male-female cable in the slot and taping/gluing it down so the connection is solid. This would give your daughter something else to hold/attach her iPod to and possibly extend the use of the unit.

If this Answer is helpful please remember to return and mark it Accepted.