기기를 수리하세요 커뮤니티 상점

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

321 질문 전체 보기

옵션

Can EM10 be fixed with just a soldering iron?

Hi, I opened up a Nintendo ds lite to shell swap it and EM10 filter just isn't there, resulting in the ds not charing. My question is... Is it possible to replace this part with a simple soldering iron or is this too hard? What should I need? Soldering iron, braid, flux, and a very fine tip? I'm a total beginner, so any directions and help would be very appreciated. Thanks!!

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 해법

옵션

Hi!

I successfully repaired this with a soldering iron many times.

You need:

  • Soldering iron (with a tiny tip is recommended)
  • Flux
  • De-soldering (copper) braid
  • Magnifier (recommended)

Please make sure that you take the time and be very carefull! It’s easy to damage the solder pads.

You can either replace the part (recommended) or either bridge the connections for the EM10).

The guide you need: Repairing a Nintendo DS that is not charging

Good Luck with the repair! If you have any questions, do not hesitate to ask!

해당 답변은 도움이 되었습니까?

예 아니요
점수 4
댓글 달기

귀하의 답변을 추가하세요

Enerd 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 15

전체 시간: 50