주요 콘텐츠로 건너뛰기

모델 A1225 / Early 2009 / 2.66, 2.93, 또는 3.06 GHz Core 2 Duo 프로세서

164 질문 전체 보기

SSD in Optical Drive Bay

Hi,

Can I replace my optical drive on this mac with an SSD? I'm not sure if the optical drive is SATA or not? I saw some web pages mentioning PATA drives, which would mean my SSD (which I'd want to boot from) would be slower?

I'm assuming the process would be similar to upgrading the optical bay to an SSD on a MBP?

Many thanks,

John

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 3개

선택된 답변

It's all SATA on your model. Here's what you'll need to do this: iMac & Mac mini Dual Drive Enclosure

iMac & Mac mini Dual Drive Enclosure 이미지

상품

iMac & Mac mini Dual Drive Enclosure

$19.99

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thanks very much for that. Very useful. I note that from system profiler looking at the SATA device tree, I have the following information for the current optical drive.

Link Speed: 3 Gigabit

Negotiated Link Speed: 1.5 Gigabit

However, the current hard drive states:

Link Speed: 3 Gigabit

Negotiated Link Speed: 3 Gigabit

Is this drop in negotiated speed, something to do with the optical drive? Would I get the same performance from an SSD as a boot drive regardless of whether it was in the optical bay, or in the current hard drive bay?

Many thanks

댓글 달기

I have the same issue, and would love an answer - seems lots of Macbook Pros had this issue fixed in a firmware update. Can't find any good info for iMac tho.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Depending on your SSD, there are some issues with SATA3 SSDs on a SATA2 bus computer, like my OCZ Agility 3 on my 2009 iMac. This is what OCZ had to say:

"Some SATAII motherboards, when used with one of the above drives will downgrade the drive to SATA1 speeds. We find this mostly on Nvidia chipset motherboards for PC and Nvidia chipset based Mac's.

To resolve this, we have a tool that will set the link speed to be locked at SATAII and improve performance. This can be reversed when you update your motherboard/system so you can have the full SATAIII speed again."

I asked a question on a Mac forum and was helped to make it run at 3Gb (SATA2):

http://apple.stackexchange.com/questions...

댓글 달기

I've just found this thread and am curious what you did in your iMac. I am going through the same process with the same computer so would love to hear a first-hand report.

Thanks

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

John Connolly 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 8,453