Controller won’t power on or charge

Question

DualShock 4 CUH-ZCT1

PS4 컨트롤러 모델 CUH-ZCT1. 소니 컴퓨터 엔터테인먼트에서 2013년 11월에 출시한 이 6축 3.7V 리튬 이온 배터리 컨트롤러 수리는 복잡하지 않습니다. (참고: 해체 안내서는 이 모델용이 아닙니다.)

20 질문 전체 보기 | 23 부품 둘러보기

Brody Girton @brodygirton

평판: 1

게시됨: 2025년 10월 23일

옵션

Controller won’t power on or charge

To give yall some background context: I tried to solder on some brand new TMR joysticks onto my PS4 JDM-055 controller. After soldering them, it worked for a little bit. I wanted to resolder one of the sticks and I think I shorted the controller. As you assumed it no longer turns on. I don’t know what to do from here on out cause I don’t know where a certified technician in my area would be and I just want my controller to work again.

If any of yall could help that would be much appreciated

Back image

Front image

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요

점수 0

댓글 1개

Thanks for the pictures! Soldering looks fine.. I would check the motherboard for shorts! Otherwise a replacement is required..

koppie007 의 2025년 10월 26일

댓글 달기

답변 2개

Thanks for the pictures! Soldering looks fine.. I would check the motherboard for shorts! Otherwise a replacement is required.. — koppie007

koppie007 @dan0 평판: 37.4k 20 16 27 · Answer 1 · 2025-10-24T07:41:29-07:00

가장 유용한 답변

koppie007 @dan0

평판: 37.4k

20

16

27

게시됨: 2025년 10월 24일

옵션

Hi Brody!

Can you share a picture with us regarding the solder work? It's possible that a trace is damaged or the motherboard had too much heat and thus something died on there.

Guide for the pictures: Adding images to an existing question - iFixit Repair Guide

Please check all the cables, solder pads and traces. If nothing is visible at first, then I would replace the motherboard OR you can check for shorts.

So, this should be the part you need: DualShock 4 Controller Motherboard (JDM-055)

Please let us know how it goes!