주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Turns on, but before anything happens, it turns off

Basicly, my iPhone turned itself off twice in one week, then the other day, it turned off again, but started itself up again, this time it got as far as loading my pin screen ( so I think ) then it instantly powers down, but then starts up again to do the same again...

When it first did this, it had full charge, and was in a loop of doing this, then the battery died, I thought this might fix it, but as soon as it had charged up, it started it's loop again, whenever it is plugged into anything, it repeats this loop, and I am unable to stop the loop.

What's going on? and how can I fix it?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

가장 유용한 답변

SOunds like a battery issue. Change the battery and see if that helps.

해당 답변은 도움이 되었습니까?

점수 2

댓글 3개:

Well, I went to the Apple Geniuses and they fixed it, but now theres a error 9 every time I try and restore it......

Krys, how did they "Fix" it? Have you tried to put it in DFU mode and restore it again?

Here's how.

INSTRUCTIONS

Step 1. Turn off iPhone

Step 2. Hold down the power and home button.

Step 3. When you see the Apple logo, release the power button but continue holding the home button down.

Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.

댓글 달기

귀하의 답변을 추가하세요

Krys 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,081