기기를 수리하세요 커뮤니티 상점

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기
질문 마감됨

옵션

little ribbon guard mainboard

hi

I just reassembled an new display on my iphone 4 and unfortunately this little black ribbon guard on the top of the mainboard broke off(or is not inserted anymore)

Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.

can anybody tell me, where this piece has to be inserted??or what it is actually for??

thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

The black rubber piece is there to make sure that the ribbon cables for the display do not get creased and instead only bend at a certain degree. There is a little black grove on the rubber piece and that grove fits with the logic board. Its not meant to stay there and can easily come off so all you have to do is slip it back on to the top of the logic board. Here is a picture of it right above where it is put on the logic board:

Block Image

Hope this Helps

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

ohh this picture ist awesome...thank you very much

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

If the answer is helpful you can mark it as accepted.

의

댓글 달기

옵션

its not that important, i dont usually bother to put it back if it falls..

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,672