After driving on LPG, engine cannot run again for a while

Question

1998-2002 Mazda 626

The Mazda Capella was commonly known in markets outside Japan as the Mazda 626. The Mazda 626's sixth-generation was built on the GF platform and released in 1997 for the 1998 model year.

55 질문 전체 보기

Goran Cabrilo @gorancabrilo

평판: 1

게시일: 2012년 6월 27일

옵션

After driving on LPG, engine cannot run again for a while

I have mazda 626 lx 1998 lpg/gasoline. Initial ignition is always on gasoline and after start I can switch to LPG. Problem started recently when I drive on LPG and off the engine. After that I am not able to run it again for a while. This is usually happened during summer time. Seems to me that need to wait some relay to be opened and gasoline come to the engine. Anyone can help me with advise

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

HemiBill @hemibill 평판: 3k 12 6 2 · Answer 1 · 2012-06-27T22:07:58-07:00

가장 유용한 답변

HemiBill @hemibill

평판: 3k

12

6

2

게시일: 2012년 6월 27일

옵션

The original fuel pump relay is located in the relay box which is right next to the battery. The exact location within the box should be printed on the relay box cover.

You should test to see if it operating and sending power to the fuel pump. It is controlled by the Powertrain Control Module but I am not certain how the original gas controls interact with the LPG controls.

BILL

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

There are two relays MAIN RELAY (B5B418811) and Z5A118821 which is relay for fuel pump. I found location of main relay but not sure for the location of relay for fuel pump.

Goran Cabrilo 의 2012년 6월 27일

댓글 달기

1998-2002 Mazda 626

After driving on LPG, engine cannot run again for a while

답변 1개

귀하의 답변을 추가하세요