주요 콘텐츠로 건너뛰기

모델 A1046 또는 A1095 / 1280x854 스크린 해상도

118 질문 전체 보기

No chime upon startup

I just reassembled my laptop, and I do not hear the apple "chime" upon start up. The computer does seem to be functioning normally, but I always heard the chime in previous macs I have owned.

Am I being paranoid, or should I just ignore this? Thanks for any input.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Does the computer work fine? or will it not turn on? Do you hear sounds when you turn the volume up or down, can you not hear any sound? If you can't hear anything, chances are that you might have unplugged the internal speakers somewhere during the keyboard replacement.

댓글 달기

답변 3개

선택된 답변

See if it boots up, are you using the original keyboard, or the replacement one you mentioned in annother question? Try to put in the original keyboard if you haven't already. Check your RAM, try to reseat it, since you could have knocked it out of place. Also try reseting the PMU, and the PRAM.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

Check that your volume is not muted.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

or speaker wire disconnected/broken.

Yes or course, that too, but sometimes the most obvious is the least obvious

댓글 달기

Thanks for all the help. The computer seems to be running fine. I played a few songs through itunes and they came through the computer speakers fine, but still no chime when I boot the computer. I am at a lost as to why this is happening. I am hoping someone with a little more experience can explain this to me. Again, thank you for all your help.

Charl

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I had a similar problem and cured it by reseating the ram and as Chris said reseting the PMU. Ralph

댓글 달기

귀하의 답변을 추가하세요

Charl 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 2,022