메인 컨텐츠로 가기

소개

This guide will show you how to replace buttons on the NVG510 modem.

부품

지정된 부품이 없습니다.

  1. Flip the router over so the stickers are facing upward.
    • Flip the router over so the stickers are facing upward.

    • Remove rubber stands from the left corner only

  2. Take out both screws using the bit driver and 2.0 flathead
    • Take out both screws using the bit driver and 2.0 flathead

  3. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  4. The case should now be open and the board should be revealed Take out the one screw located on the middle left of the board
    • The case should now be open and the board should be revealed

    • Take out the one screw located on the middle left of the board

    • It may take some force to open the case

  5. Lift the board out of the case Lift up slowly to ensure there will be no damage to the board
    • Lift the board out of the case

    • Lift up slowly to ensure there will be no damage to the board

  6. Locate the buttons near the yellow ports, they are to the right of the ports.
    • Locate the buttons near the yellow ports, they are to the right of the ports.

  7. Using a solder, locate the silver points Heat up the silver points to melt them off to release the button from the board Avoid contact with the board with the solder, only touch the silver points
    • Using a solder, locate the silver points

    • Heat up the silver points to melt them off to release the button from the board

    • Avoid contact with the board with the solder, only touch the silver points

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Shawn Rogers

회원 가입일: 2016년 06월 01일

176 Reputation

안내서 1개 작성함

댓글 0개

댓글 쓰기

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 221