Acer Aspire 5 A515-46-R3UB Speakers Replacement

소개

If the speakers on your ACER Aspire 5 A515-46-R3UB are not working because there is no sound coming out, or the sound is heavily distorted and you want to replace them, follow this guide to easily replace them. Take a look at the ACER Aspire 5 A515-46-R3UB Troubleshooting page to see if there is an alternative fix before beginning the repair.

Be sure to turn off your laptop and disconnect the charger before you begin.

필요한 것

1 단계 Battery

Acer Aspire 5 A515-46-R3UB Speakers Replacement, Battery: 1 단계, 이미지 1/2

Acer Aspire 5 A515-46-R3UB Speakers Replacement, Battery: 1 단계, 이미지 2/2

Use a JIS #1 screwdriver to remove eleven 6.7 mm screws from the bottom cover.

편집

2 단계

Use an opening tool and picks to pry the bottom cover from the laptop.
Work your way around the perimeter to release any clips before you remove the bottom case.
Remove the bottom case.

편집

3 단계

Remove the two pieces of tape from the battery and the battery connector.
Save the tape for reassembly.

편집

4 단계

Use the plastic opening tool to carefully push on each side of the connector and remove it from the socket.

편집

5 단계

Lift up the battery and remove it from the bottom case of the laptop.

편집

6 단계 Speakers

Acer Aspire 5 A515-46-R3UB Speakers Replacement, Speakers: 6 단계, 이미지 1/3

Acer Aspire 5 A515-46-R3UB Speakers Replacement, Speakers: 6 단계, 이미지 2/3

Acer Aspire 5 A515-46-R3UB Speakers Replacement, Speakers: 6 단계, 이미지 3/3

Lift the speakers off of the mounting pegs.
There is a speaker in the bottom left corner and bottom right corner.

편집

7 단계

Undo the cables connecting both speakers from their routing hooks.

편집

8 단계

Acer Aspire 5 A515-46-R3UB Speakers Replacement: 8 단계, 이미지 3/3

Pull the speaker cable away from the connector in the same direction as the individual wires are running.
Pull evenly on the full width of the cable so that no individual wires are overly strained.
To remove the cable from its mounting position, use a spudger to lift the ribbon cables off of the speaker cord.
Now that the speaker cable is released, remove the speakers.