기기를 수리하세요 커뮤니티 상점

Air Hog Smash Bots Radio Receiver Replacement

소개

This outline will guide you to replace the radio receiver, if it happens to break will in use. A soldering iron will need to be used for this, directions on how to solder can be found here.

필요한 것

  1. Air Hog Smash Bots Radio Receiver Replacement, Batteries: 1 단계, 이미지 1/1

    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

    편집

  2. Air Hog Smash Bots Radio Receiver Replacement: 2 단계, 이미지 1/1

    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

    편집

  3. Air Hog Smash Bots Radio Receiver Replacement: 3 단계, 이미지 1/1

    • Remove the 3 AAA batteries.

    편집

  4. Air Hog Smash Bots Radio Receiver Replacement, External Casing: 4 단계, 이미지 1/2 Air Hog Smash Bots Radio Receiver Replacement, External Casing: 4 단계, 이미지 2/2

    • Using a Phillip #0 screwdriver to remove the eight 8 mm screws.

    편집

  6. Air Hog Smash Bots Radio Receiver Replacement: 5 단계, 이미지 1/2 Air Hog Smash Bots Radio Receiver Replacement: 5 단계, 이미지 2/2

    • Remove the upper armor of the Smash Bot.

    편집

  7. Air Hog Smash Bots Radio Receiver Replacement: 6 단계, 이미지 1/1

    • Hold the upper body and slide out the bottom half of the Smash Bot.

    • The motor extends from the lower-body into the upper-body. Be careful to not damage the motor.

    편집

  8. Air Hog Smash Bots Radio Receiver Replacement: 7 단계, 이미지 1/1

    • Peel back the four decal stickers that hold the front and back of the bot together.

    편집

  9. Air Hog Smash Bots Radio Receiver Replacement: 8 단계, 이미지 1/2 Air Hog Smash Bots Radio Receiver Replacement: 8 단계, 이미지 2/2

    • Use the plastic opening tool to pry the front and back of the lower body apart.

    • Carefully remove the back of the bot from the front.

    편집

  10. Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: 9 단계, 이미지 1/2 Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: 9 단계, 이미지 2/2

    • Use the Phillips 0 screwdriver to remove two 4.75mm screws.

    편집

  11. Air Hog Smash Bots Radio Receiver Replacement: 10 단계, 이미지 1/2 Air Hog Smash Bots Radio Receiver Replacement: 10 단계, 이미지 2/2

    • Use the soldering workstation to remove the five wires. Directions on how to solder can be found here.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Brittany Frecker

회원 가입일: 02/08/16

542 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

IUPUI, Team 1-1, Baechle Spring 2016 IUPUI, Team 1-1, Baechle Spring 2016 회원

IUPUI-BAECHLE-S16S1G1

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 9

전체 시간: 283