Alienware 17 R2 Status-Light Board Replacement - iFixit 수리 안내서

필요한 것

1 단계 Disconnecting the Status-Light Board

WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
Make sure base panel is removed.
Make sure palm rest is removed.
Lift the latch and disconnect the status-light board to the palm-rest assembly.

2 단계 Removing the Screws

Remove the screws that secure the status-light board to the palm-rest assembly.

3 단계 Lifting the Status-Light Board

Alienware 17 R2 Status-Light Board Replacement, Lifting the Status-Light Board: 3 단계, 이미지 1/1

Lift the status-light board off the palm-rest assembly.

4 단계 Screw Align

Alienware 17 R2 Status-Light Board Replacement, Screw Align: 4 단계, 이미지 1/1

Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

5 단계 Screw Replacement

Alienware 17 R2 Status-Light Board Replacement, Screw Replacement: 5 단계, 이미지 1/1

Replace the screws that secure the status-light board to the palm-rest assembly.

6 단계 Sliding the Status-Light Board

Alienware 17 R2 Status-Light Board Replacement, Sliding the Status-Light Board: 6 단계, 이미지 1/1

Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Terrence15

회원 가입일: 12/18/17

79,121 평판

안내서 441개 작성하였습니다

배지 +25개 더

팀

RampUP America, Inc. RampUP America, Inc. 회원

Community

42 회원들

안내서 1,985개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 284