이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.
필요한 것
-
-
Lift the latch and disconnect the status-light board to the palm-rest assembly.
-
-
-
Remove the screws that secure the status-light board to the palm-rest assembly.
-
-
-
-
Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.
-
-
-
Replace the screws that secure the status-light board to the palm-rest assembly.
-
-
-
Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.