주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Use this guide to replace the speaker on the Amazon Fire 5th Generation tablet. This replacement is fairly simple but requires basic knowledge of solder and how to use a soldering iron.

부품

지정된 부품이 없습니다.

  1. Ensure that your device is turned off. Remove any micro-SD card that may be installed in the Fire. Failure to do so could damage the micro-SD card itself or the micro-SD card reader on the Fire.
    • Ensure that your device is turned off.

    • Remove any micro-SD card that may be installed in the Fire. Failure to do so could damage the micro-SD card itself or the micro-SD card reader on the Fire.

    • While holding the device firmly, wedge the iFixit Opening Tool into the crease along the outer edge of the device (as shown in the image).

    • Slowly, grind the iFixit Opening Tool into the crease along the outer edges of the device until the entire back cover loosens.

    • Then, remove the back cover from the device.

  2. Pry the speaker from the case using the iFixit Opening Tool. Lift the speaker up from the device to remove the speaker wires from their groove in the case.
    • Pry the speaker from the case using the iFixit Opening Tool.

    • Lift the speaker up from the device to remove the speaker wires from their groove in the case.

    • Be careful not to pull the speaker wires from the motherboard.

  3. Desolder the speaker wires from the motherboard. iFixit has a helpful guide explaining how to solder and desolder here: How To Solder and Desolder Connections iFixit has a helpful guide explaining how to solder and desolder here: How To Solder and Desolder Connections
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Amber Bunch

회원 가입일: 2016년 02월 10일

1,280 평판

안내서 3개 작성하였습니다

USF Tampa, Team 1-2, Nance Spring 2016 USF Tampa, Team 1-2, Nance Spring 2016 회원

USFT-NANCE-S16S1G2

3 회원들

안내서 13개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 850