소개

This mouse was designed with usability in mind taking little to no effort to fix anything.

  1. Use the screwdriver to remove the stickers hiding the screws marked in red.
    • Use the screwdriver to remove the stickers hiding the screws marked in red.

    댓글 쓰기

  2. Remove the 4 screws to continue.
    • Remove the 4 screws to continue.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

    댓글 쓰기

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

    댓글 쓰기

    • Pull the Scroll wheel, in red, to the left to remove it.

    • This may take some force to remove. Make sure to pull it parallel to the board, instead of perpendicularly.

    • Replace/clean if needed.

    • If your mouse still doesn't work after this step, please continue onto the next step.

    댓글 쓰기

    • Desolder these 3 pins and solder the replacement part in.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Vincent Lee

회원 가입일: 2014년 01월 23일

361 평판

안내서 3개 작성하였습니다

Cal Poly, Team 1-39, Maness Winter 2014 Cal Poly, Team 1-39, Maness Winter 2014 회원

CPSU-MANESS-W14S1G39

4 회원들

안내서 8개 작성하였습니다

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - 답글

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 17

지난 30일: 57

전체 시간: 4,232