Anker 2.4G Wireless Mouse Side Button Replacement - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

필요한 것

1 단계 Side Button

Anker 2.4G Wireless Mouse Side Button Replacement, Side Button: 1 단계, 이미지 1/1

Use the screwdriver to pry off the stickers marked in red to reveal the location of 4 screws.

2 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 2 단계, 이미지 1/1

Remove the 4 screws to continue.

3 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 3 단계, 이미지 1/2

Anker 2.4G Wireless Mouse Side Button Replacement: 3 단계, 이미지 2/2

Pry the center of the mouse apart to separate the upper and lower housing of the boards.

4 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 4 단계, 이미지 1/1

Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.
Pull as far up on the wire as possible, but be careful to avoid ripping the wires.

5 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 5 단계, 이미지 1/1

Take the upper housing of the mouse and begin to remove the two screws (highlighted in red) that hold the board in place.

6 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 6 단계, 이미지 1/1

Gently remove board.

7 단계

Anker 2.4G Wireless Mouse Side Button Replacement: 7 단계, 이미지 1/3

Anker 2.4G Wireless Mouse Side Button Replacement: 7 단계, 이미지 2/3

Anker 2.4G Wireless Mouse Side Button Replacement: 7 단계, 이미지 3/3

The side buttons are the red push buttons highlighted in red.
To remove them, flip the board over and desolder the leads highlighted in orange.
Replace components with new ones and resolder back in place.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

Andreas Apitz

회원 가입일: 01/23/14

119 평판

안내서 1개 작성함

배지 +3개 더

팀

Cal Poly, Team 1-39, Maness Winter 2014 Cal Poly, Team 1-39, Maness Winter 2014 회원

CPSU-MANESS-W14S1G39

4 회원들

안내서 16개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 668