소개
This guide will help your install a new driver.
필요한 것
-
-
-
With a #0 phillips head, unscrew the three, 1 cm screws which are holding the driver (red wafer) in its bracket.
-
-
-
Remove the two wires, red and yellow, by de-soldering them from the driver using a soldering iron and desoldering wick. Reference How To Solder and Desolder Connections.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.
댓글 2개
where can i buy a replacement driver?
You can order parts directly from PARTS@ATUS.COM
My jbl waerless headphone speaker changes how price
Max Mad - 답글
How to install the earpads
rangaranju - 답글