주요 콘텐츠로 건너뛰기

Beats Solo 3 Charging Port Replacement

필요한 것

  1. Beats Solo 3 Charging Port Replacement, Charging Port: 1 단계, 이미지 1/1
    • Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.

    • Be careful to not rip the ear pad fabric with your tools.

  2. Beats Solo 3 Charging Port Replacement: 2 단계, 이미지 1/1
    • Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.

    • There are two screws in the big red circle at the bottom.

  3. Beats Solo 3 Charging Port Replacement: 3 단계, 이미지 1/1
    • Desolder all wires connecting the circuit panel to the rest of the device.

    • There are two wires in the big red circle at the bottom and one in the small red circle above.

  4. Beats Solo 3 Charging Port Replacement: 4 단계, 이미지 1/2 Beats Solo 3 Charging Port Replacement: 4 단계, 이미지 2/2
    • After you desolder all wires you are able to remove and replace the charging port.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Abdulaziz Alotaibi

회원 가입일: 03/21/22

179 평판

안내서 1개 작성함

University of Alabama, Team 1-2, Bedsole Spring 2022 University of Alabama, Team 1-2, Bedsole Spring 2022 회원

UA-BEDSOLE-S22S1G2

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 34

30일 전: 186

전체 시간: 4,783