주요 콘텐츠로 건너뛰기

소개

Follow these instructions to remove the throttle cable, either to replace it or to service the throttle control.

  1. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement, Throttle Cable: step 1, image 3 of 3
    • Cut and remove any zip ties securing the throttle cable.

  2. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 2, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 2, image 2 of 2
    • Use a Phillips #2 driver to remove the screw securing the lower end of the throttle cable.

  3. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 3, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 3, image 2 of 2
    • Remove the bracket securing the lower end of the throttle cable.

  4. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 4, image 3 of 3
    • Rotate the lower end of the throttle cable to detach it from the throttle.

  5. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 5, image 3 of 3
    • When reinstalling the throttle control cable, check to make sure that the throttle control moves the throttle through its full range of motion.

    • If necessary, loosen the screw securing the lower end of the throttle cable and adjust the position of the cable. Re-tighten the screw and check to make sure that the throttle moves through its full range of motion.

  6. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 6, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 6, image 2 of 2
    • Use a 7/16" wrench or deep socket to remove the cap from the throttle control.

  7. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 7, image 1 of 2 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 7, image 2 of 2
    • Advance the throttle control to expose the gear rack containing the upper end of the throttle cable.

  8. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 8, image 3 of 3
    • Separate the gear rack from the upper end of the throttle cable.

    • Lift and remove the gear rack from the throttle control.

    • If the gear rack doesn't fully detach, advance the throttle control lever a little farther.

    • Lubricate the gear rack with a bit of lithium grease during reassembly.

  9. Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 1 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 2 of 3 Billy Goat Brush Cutter BC2600HHF 2015 Throttle Cable Replacement: step 9, image 3 of 3
    • Use a 1/2" wrench to unscrew the upper end of the throttle cable from the throttle control.

    • Slide the throttle cable down out of the bottom of the throttle control, and remove the cable.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Jeff Suovanen

회원 가입일: 2013년 08월 06일

388,590 평판

안내서 260개 작성하였습니다

iFixit iFixit 회원

Community

141 회원들

안내서 15,124개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 16

30일 전: 60

전체 시간: 1,039