Bissell CrossWave Cordless Max 2554A Charging Cord Replacement

소개

If the Bissell Crosswave Cordless Max (model 2554A) battery has died, this guide will show you how to replace the charging cord. This guide features information on common issues while charging. The charging port could be blocked or damaged. This guide has information to help with cleaning the port from dust or particle buildup. Replacing the cord is not as simple as buying a new one, but requires removal from the base. The cord attached to the docking station is easily replaceable once out from the base.

필요한 것

1 단계 Charging Cord

Bissell CrossWave Cordless Max 2554A Charging Cord Replacement, Charging Cord: 1 단계, 이미지 1/2

Bissell CrossWave Cordless Max 2554A Charging Cord Replacement, Charging Cord: 1 단계, 이미지 2/2

Flip the charging base over, so that the support pillar is facing down.

번역하기

2 단계

Remove the two 11.6 mm Phillips #1 screws deep within the pillar.

번역하기

3 단계

Remove the plastic piece holding the cord, as well as the charging cord.
When replacing the charging cord, ensure that the new unit has the same voltage and current limits, as to not damage the internal battery.

번역하기