기기를 수리하세요 커뮤니티 상점

Black and Decker TR1278B Circuit Board Replacement

소개

This guide provides instructions for the replacement of your Black and Decker TR1278B toaster circuit board.

필요한 것

  1. Black and Decker TR1278B Circuit Board Replacement, Top Cover: 1 단계, 이미지 1/1

    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

    번역하기

  2. Black and Decker TR1278B Circuit Board Replacement: 2 단계, 이미지 1/1

    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Or a slightly different model has six screws that require an allen wrench (hex key). Ones that have a ball end will not work. I had to use one that had more of a Star of David, pointy pattern to it.

    번역하기

  3. Black and Decker TR1278B Circuit Board Replacement: 3 단계, 이미지 1/1

    • Detach the bottom from the front cover using the plastic opening tool.

    번역하기

  5. Black and Decker TR1278B Circuit Board Replacement: 4 단계, 이미지 1/1

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    번역하기

  6. Black and Decker TR1278B Circuit Board Replacement: 5 단계, 이미지 1/1

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    번역하기

  7. Black and Decker TR1278B Circuit Board Replacement, Circuit Board: 6 단계, 이미지 1/1

    • Locate the circuit board inside front cover.

    번역하기

  8. Black and Decker TR1278B Circuit Board Replacement: 7 단계, 이미지 1/2 Black and Decker TR1278B Circuit Board Replacement: 7 단계, 이미지 2/2

    • Use a Phillips head #2 screwdriver to unscrew all five screws that attach the circuit board to the top cover.

    • Remove the circuit board.

    번역하기

    • Inspect the circuit board for any burnt or otherwise damaged components.

    • Use a soldering kit to unsolder the damaged component.

    • Once the damaged component has been unsoldered from the circuit board, remove (and replace) it.

    • iFixit Soldering Guide.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Brea-Monique

회원 가입일: 02/15/17

351 평판

안내서 3개 작성하였습니다

배지: 8

배지 +5개 더

팀

USF Tampa, Team 8-1, Eyestone Spring 2017 USF Tampa, Team 8-1, Eyestone Spring 2017 회원

USFT-EYESTONE-S17S8G1

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 12

전체 시간: 1,025