Bose Quiet Comfort 35 II Audio Jack Connector Replacement

소개

Sometimes Bose QuietComfort 35 II (Model:789564-0010) users complain about intermittent audio input when the audio jack cable is moved. This can be a sign of a bad audio jack connector. This guide details the removal and replacement of the stereo jack connector. If a new audio jack is added the following guide on soldering may be helpful:

How To Solder and Desolder Connections

필요한 것

1 단계 Audio Jack Cable Connector

Bose Quiet Comfort 35 II Audio Jack Connector Replacement, Audio Jack Cable Connector: 1 단계, 이미지 1/1

Take off ear cushion pad using the plastic opening tool. Pry until you notice the seam of the ear cushion separates from the plastic tabs.

편집

2 단계

Bose Quiet Comfort 35 II Audio Jack Connector Replacement: 2 단계, 이미지 3/3

Take off the ear cover by peeling off the glue with hands.

편집

3 단계

Remove the two 7-millimeter silver screws from the inside by using the Phillips #000 screwdriver to disconnect the back cover.

편집

4 단계

Remove the two 5-millimeter silver screws attaching the earphones to the headband using the Phillips #000 screwdriver.

편집

5 단계

Detach the earpiece form the band using the flat part of the metal spudger.
Slide the joint at the end of the headphone band out to release ear piece.

편집

6 단계

Detach the silver cover on the outside of the headset using the spudger.
Pry until you hear a distinct pop; this indicates the cover has separated from its base.

편집

7 단계

Solder off the ribbon cable from the driver near the cable connector port to detach it.

편집

8 단계

Replace the cable connector with spare driver/audio jack combo.
Optional: desolder the five audio jack posts seen here, and replace individual audio jack.

편집