Casio LK-170 Speaker Replacement

소개

To properly hear the gorgeous notes played from the keys, the replacement for the speaker(s) of the keyboard will take a bit of time as you need a screwdriver and soldering iron. Note that these instructions are to replace the left speaker, but the same steps can be taken to replace the right speaker.

필요한 것

1 단계 Speaker

Casio LK-170 Speaker Replacement, Speaker: 1 단계, 이미지 1/3

Casio LK-170 Speaker Replacement, Speaker: 1 단계, 이미지 2/3

Casio LK-170 Speaker Replacement, Speaker: 1 단계, 이미지 3/3

Locate the seven 11mm screws on the back of the keyboard in order to remove the speaker from the front of the keyboard.
There are 7 screws that need to be removed in total to replace one speaker. Use a JIS-1 screwdriver to remove these screws: 2 on the back panel, and 4 on the side of the keyboard.
Three of these seven screws are slightly hidden and may be hard to find.

편집

2 단계

Gently remove the speaker and its compartment from the front of the keyboard.

편집

3 단계

Remove the four 11 mm screws with JIS-1 screwdriver on the four corners of the silver square on the back of the speaker.

편집

4 단계

A soldering iron is needed to remove the wires connected to the speaker in order to fully replace it. For soldering help, take a look at the Soldering and Desoldering Connections guide.
Desolder the metal that attaches the blue and white wires to the speaker.
Remove the speaker.