주요 콘텐츠로 건너뛰기

Cassida Counterfeit Detector LCD Display Replacement

필요한 것

  1. 주의: 1-6 단계들은 진행 중으로 표시된 안내서에서 제공되었습니다.

    Cassida Counterfeit Detector LCD Display Replacement, Cassida Counterfeit Detector Disassembly: 1 단계, 이미지 1/1
    • Remove the rubber legs.

  2. Cassida Counterfeit Detector LCD Display Replacement: 2 단계, 이미지 1/1
    • Using a Phillips #1 bit, remove the circled screws.

  3. Cassida Counterfeit Detector LCD Display Replacement: 3 단계, 이미지 1/1
    • Pry the top cover off, starting from the side with the switch, with a metal spudger.

  4. Cassida Counterfeit Detector LCD Display Replacement: 4 단계, 이미지 1/1
    • Pop the 4 tabs on the top of the machine up with a metal spudger and then remove the 2 side panels.

  5. Cassida Counterfeit Detector LCD Display Replacement: 5 단계, 이미지 1/1
    • Disconnect the wires circled and then remove the top section from the bottom section just by pulling the top section straight up and holding onto the bottom.

  6. Cassida Counterfeit Detector LCD Display Replacement: 6 단계, 이미지 1/1
    • All the parts disassembled.

  7. Cassida Counterfeit Detector LCD Display Replacement, The LCD Display: 7 단계, 이미지 1/1
    • Remove the two screws on the underside of the top case with a Phillips #1 screwdriver.

  8. Cassida Counterfeit Detector LCD Display Replacement: 8 단계, 이미지 1/1
    • This is the LCD detached. Install your new LCD display with the two screws and then plug the connector back into the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

TREVOR j NELMS

회원 가입일: 10/30/19

543 평판

안내서 4개 작성하였습니다

University of Memphis, Team S2-G2, Kim Fall 2019 University of Memphis, Team S2-G2, Kim Fall 2019 회원

UM-KIM-F19S2G2

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 36