기기를 수리하세요 커뮤니티 상점

Cineyo BT-03 Device Charging Port Replacement

소개

This guide will take you step by step through the simple process of replacing your charging port.

필요한 것

  1. Cineyo BT-03 Device Charging Port Replacement, Cineyo BT-03 Device Disassembly: 1 단계, 이미지 1/3 Cineyo BT-03 Device Charging Port Replacement, Cineyo BT-03 Device Disassembly: 1 단계, 이미지 2/3 Cineyo BT-03 Device Charging Port Replacement, Cineyo BT-03 Device Disassembly: 1 단계, 이미지 3/3

    • Remove the top (button side) rubber cover using your hands.

    편집

  2. Cineyo BT-03 Device Charging Port Replacement: 2 단계, 이미지 1/2 Cineyo BT-03 Device Charging Port Replacement: 2 단계, 이미지 2/2

    • Flip over the device and remove the bottom rubber cover using your hands.

    편집

  3. Cineyo BT-03 Device Charging Port Replacement: 3 단계, 이미지 1/3 Cineyo BT-03 Device Charging Port Replacement: 3 단계, 이미지 2/3 Cineyo BT-03 Device Charging Port Replacement: 3 단계, 이미지 3/3

    • Using your hands, pull off the plastic side cover (on the side with the audio jack) using the indented tab. The indented tab has been highlighted in the picture.

    편집

  4. Cineyo BT-03 Device Charging Port Replacement: 4 단계, 이미지 1/3 Cineyo BT-03 Device Charging Port Replacement: 4 단계, 이미지 2/3 Cineyo BT-03 Device Charging Port Replacement: 4 단계, 이미지 3/3

    • Detach the plastic speaker cover on both the front and back sides. Then slide the cover off of the device.

    • The cover should remain as one solid piece.

    편집

  6. Cineyo BT-03 Device Charging Port Replacement: 5 단계, 이미지 1/1

    • Remove the five 1 cm screws on the back side (opposite of the speakers) of the device using a Phillips #1 screwdriver.

    편집

  7. Cineyo BT-03 Device Charging Port Replacement: 6 단계, 이미지 1/1

    • Gently pull apart the two sections of the device.

    편집

  8. Cineyo BT-03 Device Charging Port Replacement, Charging Port: 7 단계, 이미지 1/1

    • Disconnect all wires from the top of the circuit board.

    편집

  9. Cineyo BT-03 Device Charging Port Replacement: 8 단계, 이미지 1/1

    • Using a small Philips head screwdriver, remove the two 5 mm screws from the main circuit board.

    편집

  10. Cineyo BT-03 Device Charging Port Replacement: 9 단계, 이미지 1/3 Cineyo BT-03 Device Charging Port Replacement: 9 단계, 이미지 2/3 Cineyo BT-03 Device Charging Port Replacement: 9 단계, 이미지 3/3

    • Use the soldering iron to melt the two contact points that attach the wires to the rear side of the circuit board.

    • This will require soldering off the wires connecting the bottom of the circuit board to the device. iFixit's Soldering Guide is available to aid in soldering.

    편집

  11. Cineyo BT-03 Device Charging Port Replacement: 10 단계, 이미지 1/2 Cineyo BT-03 Device Charging Port Replacement: 10 단계, 이미지 2/2

    • Remove the circuit board from the device.

    편집

  12. Cineyo BT-03 Device Charging Port Replacement: 11 단계, 이미지 1/1

    • Using a soldering iron, remove the charging port from the circuit board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Rene Klopf

회원 가입일: 01/30/17

463 평판

안내서 4개 작성하였습니다

배지: 6

배지 +3개 더

팀

Baylor, Team 8-3, Whitney Spring 2017 Baylor, Team 8-3, Whitney Spring 2017 회원

BU-WHITNEY-S17S8G3

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 139