기기를 수리하세요 커뮤니티 상점

Clarke Floor Sander 07014A 2012 Blower Housing Replacement

소개

This guide shows how to remove and replace the blower housing for a Clarke Floor Sander 07014A.

필요한 것

  1. Clarke Floor Sander 07014A 2012 Blower Housing Replacement, Dust Bag: 1 단계, 이미지 1/2 Clarke Floor Sander 07014A 2012 Blower Housing Replacement, Dust Bag: 1 단계, 이미지 2/2

    • Before you begin, be sure that the sander is unplugged and powered off.

    • Twist and pull the dust bag collar to disconnect it from the elbow pipe.

    • Remove the dust bag.

    편집

  2. Clarke Floor Sander 07014A 2012 Blower Housing Replacement, Blower Housing: 2 단계, 이미지 1/2 Clarke Floor Sander 07014A 2012 Blower Housing Replacement, Blower Housing: 2 단계, 이미지 2/2

    • Peel the rubber sleeve down from the elbow pipe to reveal the pipe socket.

    편집

  4. Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 3 단계, 이미지 1/3 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 3 단계, 이미지 2/3 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 3 단계, 이미지 3/3

    • Grasp the elbow pipe with your hands and pull up while twisting to disconnect it from the blower housing.

    • Remove the elbow pipe.

    편집

  5. Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 4 단계, 이미지 1/3 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 4 단계, 이미지 2/3 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 4 단계, 이미지 3/3

    • Twist and pull to disconnect both suction hoses from the blower housing.

    편집

  6. Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 5 단계, 이미지 1/2 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 5 단계, 이미지 2/2

    • Remove the four 22mm long Phillips screws around the side of the blower housing.

    편집

  7. Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 6 단계, 이미지 1/2 Clarke Floor Sander 07014A 2012 Blower Housing Replacement: 6 단계, 이미지 2/2

    • Lift the blower housing upwards and slide it off of the blower assembly.

    • Remove the blower housing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

Arthur Shi

회원 가입일: 01/03/18

253,422 평판

안내서 526개 작성하였습니다

배지: 47

배지 +44개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 17,198개 작성하였습니다

댓글 한 개

Were do you get the sticker?

JEFFREY - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 32

전체 시간: 1,466