Skip to main content

소개

If your dryer isn't turning on, the back of the On/Off button that engages the power may be broken.

부품

No parts specified.

  1. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer. Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.
    • Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

  2. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  3. Some pieces may fall out when removing the face of the handle.
    • Some pieces may fall out when removing the face of the handle.

    • Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

  4. Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in. Once the new switch is in place you can put the dryer back together.
    • Now take out the On/Off switch by gently pulling it out towards you and lightly pushing it to the right with your finger until it comes out of the groove it is resting in.

    • Once the new switch is in place you can put the dryer back together.

결론

To reassemble your device, follow these instructions in reverse order.

Candace

회원 가입일: 2014년 01월 23일

884 평판

안내서 7개 작성하였습니다

Cal Poly, Team 10-33, Maness Winter 2014 Cal Poly, Team 10-33, Maness Winter 2014 회원

CPSU-MANESS-W14S10G33

3 회원들

안내서 7개 작성하였습니다

Looks to me that a replacement switch would be required. How can obtain one?

Jaky Felix - 답글

“No parts required” is what’s displayed by default when there’s no link to an actual part for sale—it’’s a bit silly and clearly incorrect in this case. For hard-to-find parts, check eBay or Amazon. Also, a lot of folks with multiple broken units use these guides to cobble together one working unit from the parts. Good luck!

Jeff Suovanen -

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 3

지난 30일: 12

전체 시간: 1,787