기기를 수리하세요 커뮤니티 상점

Dell Inspiron 11-3162 Battery Replacement

소개

You'll find that this will help improve your battery life to factory new! Always be careful when working with a battery.

필요한 것

  1. Dell Inspiron 11-3162 Battery Replacement, Back Cover Removal: 1 단계, 이미지 1/2 Dell Inspiron 11-3162 Battery Replacement, Back Cover Removal: 1 단계, 이미지 2/2

    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

    • Use tweezers to pry and remove the center screw cover on the back cover.

    편집

  2. Dell Inspiron 11-3162 Battery Replacement: 2 단계, 이미지 1/2 Dell Inspiron 11-3162 Battery Replacement: 2 단계, 이미지 2/2

    • Use a Phillips screwdriver to unscrew the nine 6.8 mm screws securing the back cover.

    편집

  4. Dell Inspiron 11-3162 Battery Replacement: 3 단계, 이미지 1/1

    • Use a spudger to pry around the base edges of the back cover to loosen it from the laptop.

    • Do not fully remove the cover, as it is still attached to the laptop with cables.

    편집

  5. Dell Inspiron 11-3162 Battery Replacement: 4 단계, 이미지 1/3 Dell Inspiron 11-3162 Battery Replacement: 4 단계, 이미지 2/3 Dell Inspiron 11-3162 Battery Replacement: 4 단계, 이미지 3/3

    • If you are only replacing the battery, you can skip this step. Be careful not to strain the still-connected cable as you work.

    • Unlock the wide ZIF connector securing the flex cable.

    • To unlock a ZIF connector, use the tip of a spudger or your fingernail to flip up the small, hinged locking flap.

    • Pull the ribbon cable outwards to disconnect the back cover from the motherboard.

    편집

  6. Dell Inspiron 11-3162 Battery Replacement, Battery: 5 단계, 이미지 1/2 Dell Inspiron 11-3162 Battery Replacement, Battery: 5 단계, 이미지 2/2

    • Use a Phillips screwdriver to unscrew the three 4 mm screws securing the battery.

    편집

  7. Dell Inspiron 11-3162 Battery Replacement: 6 단계, 이미지 1/3 Dell Inspiron 11-3162 Battery Replacement: 6 단계, 이미지 2/3 Dell Inspiron 11-3162 Battery Replacement: 6 단계, 이미지 3/3

    • Use your fingers (or a set of tweezers) to disconnect the battery cable from the motherboard by gently pulling it towards the battery.

    • Pull parallel to the battery, not straight up.

    • Lift and remove the battery from its recess.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

다른 6명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Dominic DeLong

회원 가입일: 09/29/16

775 평판

안내서 4개 작성하였습니다

배지: 15

배지 +12개 더

팀

Eastern Washington University, Team 1-2, Crane Fall 2016 Eastern Washington University, Team 1-2, Crane Fall 2016 회원

EWU-CRANE-F16S1G2

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 3,051