Dell Precision 5520 Battery Replacement

소개

This guide shows how to remove and replace the battery for the Dell Precision 5520 laptop.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

필요한 것

1 단계 Base Cover

Dell Precision 5520 Battery Replacement, Base Cover: 1 단계, 이미지 1/2

Dell Precision 5520 Battery Replacement, Base Cover: 1 단계, 이미지 2/2

Be sure to power off and unplug your device before you begin your repair.
Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).
Pry the edges of the base cover and lift it to remove it from the computer.
NOTE: Use a Torx #5 screwdriver for the base screws and a Phillips screwdriver for the two M2x8 screws inside the badge flap.

편집

2 단계 Battery

Dell Precision 5520 Battery Replacement, Battery: 2 단계, 이미지 1/1

Disconnect the battery cable from the system board [1].
Remove the seven M2x4 screws that secure the battery to the computer [2].
Lift the battery off the computer [3].
Do not apply pressure to the surface of the battery
Do not bend
Do not use tools of any kind to pry on or against the battery
If a battery cannot be removed within the constraints above, please contact Dell technical support