기기를 수리하세요 커뮤니티 상점

Dewalt DCD778 Motor Replacement

소개

If the motor of your Dewalt DCD778 is not operating properly or not operating at all, this guide will show you how to replace the motor of your drill.

필요한 것

  1. Dewalt DCD778 Motor Replacement, Battery: 1 단계, 이미지 1/1

    • Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

    편집

  2. Dewalt DCD778 Motor Replacement: 2 단계, 이미지 1/1

    • Use your other hand to push down on the yellow button on the battery.

    편집

  3. Dewalt DCD778 Motor Replacement: 3 단계, 이미지 1/1

    • Pull the battery in a horizontal direction away from the drill.

    편집

  5. Dewalt DCD778 Motor Replacement, Motor: 4 단계, 이미지 1/2 Dewalt DCD778 Motor Replacement, Motor: 4 단계, 이미지 2/2

    • Remove the eight 16 mm, Torx Security #15 screws.

    편집

  6. Dewalt DCD778 Motor Replacement: 5 단계, 이미지 1/1

    • Lay the drill on its side and gently lift the top half off it.

    편집

  7. Dewalt DCD778 Motor Replacement: 6 단계, 이미지 1/1

    • Lift the drill mechanism out of the shell.

    • Desolder the red and black wires from the motor.

    편집

  8. Dewalt DCD778 Motor Replacement: 7 단계, 이미지 1/2 Dewalt DCD778 Motor Replacement: 7 단계, 이미지 2/2

    • Slightly twist and pull motor away from the clutch.

    편집

  9. Dewalt DCD778 Motor Replacement: 8 단계, 이미지 1/1

    • When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Brittany

회원 가입일: 03/09/19

693 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

Casper College, Team S1-G5, Lareau Spring 2019 Casper College, Team S1-G5, Lareau Spring 2019 회원

CASC-LAREAU-S19S1G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 42

전체 시간: 1,385