기기를 수리하세요 커뮤니티 상점

DigiLand DL700D Battery Replacement

소개

This guide will cover the disassembly and replacement of the battery for the Digiland DL700D. The battery is attached to the mainboard by soldered wires, so some soldering will be required. We recommend reviewing iFixit's soldering guide here.

필요한 것

  1. DigiLand DL700D Battery Replacement, Battery: 1 단계, 이미지 1/3 DigiLand DL700D Battery Replacement, Battery: 1 단계, 이미지 2/3 DigiLand DL700D Battery Replacement, Battery: 1 단계, 이미지 3/3

    • Remove the device's back cover using the plastic opening tool.

    번역하기

  2. DigiLand DL700D Battery Replacement: 2 단계, 이미지 1/3 DigiLand DL700D Battery Replacement: 2 단계, 이미지 2/3 DigiLand DL700D Battery Replacement: 2 단계, 이미지 3/3

    • Remove the three pieces of adhesive placed over the edges of the battery.

    번역하기

  4. DigiLand DL700D Battery Replacement: 3 단계, 이미지 1/1

    • Remove the wifi antenna from the bottom of the battery.

    번역하기

  5. DigiLand DL700D Battery Replacement: 4 단계, 이미지 1/3 DigiLand DL700D Battery Replacement: 4 단계, 이미지 2/3 DigiLand DL700D Battery Replacement: 4 단계, 이미지 3/3

    • Heat up the soldering iron, proceed to desolder and remove the battery connections.

    번역하기

  6. DigiLand DL700D Battery Replacement: 5 단계, 이미지 1/3 DigiLand DL700D Battery Replacement: 5 단계, 이미지 2/3 DigiLand DL700D Battery Replacement: 5 단계, 이미지 3/3

    • Remove the battery from the casing using a nylon spudger.

    • Be careful not to puncture the battery casing.

    • Carefully peel the battery free from the casing.

    번역하기
결론

To reassemble your device, follow instructions in the reverse order. Apply new Kapton Tape and apply extra solder as needed.

작성자

다른 기여자 2명과 함께

Justin Edwards

회원 가입일: 03/29/18

241 평판

안내서 2개 작성하였습니다

배지: 3

팀

IUPUI, Team S3-G4, Harley Spring 2018 IUPUI, Team S3-G4, Harley Spring 2018 회원

IUPUI-HARLEY-S18S3G4

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 335