Dirt Devil Scorpion Quick Flip Power Cord Replacement - iFixit 수리 안내서

소개

The power cord on the Dirt Devil Scorpion Quick Flip has been known to fail by consumers. This guide walks you through the replacement of a power cord on one of these vacuums.

필요한 것

1 단계 Power Cord

Dirt Devil Scorpion Quick Flip Power Cord Replacement, Power Cord: 1 단계, 이미지 1/1

While holding the device by the handle, press the button on the left-hand side of the vacuum handle in order to release the nozzle from the body.

2 단계

Dirt Devil Scorpion Quick Flip Power Cord Replacement: 2 단계, 이미지 1/2

Dirt Devil Scorpion Quick Flip Power Cord Replacement: 2 단계, 이미지 2/2

Using a Phillips #1 Screwdriver, remove all six of the 4 mm screws holding the shell together.

3 단계

Dirt Devil Scorpion Quick Flip Power Cord Replacement: 3 단계, 이미지 1/1

Using utility scissors, cut the black and white cables approximately an inch and a half above where they connect to the faulty power cord.

4 단계

Dirt Devil Scorpion Quick Flip Power Cord Replacement: 4 단계, 이미지 1/1

Using a soldering iron, fuse the black and white cables from the new power cord to where the previous cord was cut away.
Using electrical tape, cover the exposed area.
Check out our How to Solder and Desolder Connections guide if you are unfamiliar with the soldering process.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Corbet E Warren

회원 가입일: 10/02/19

109 평판

안내서 1개 작성함

팀

The Citadel Military College of South Carolina, Team S3-G14, Eggleston Fall 2019 The Citadel Military College of South Carolina, Team S3-G14, Eggleston Fall 2019 회원

CMCSC-EGGLESTON-F19S3G14

3 회원들

안내서 3개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 13

전체 시간: 286