주요 콘텐츠로 건너뛰기

Disassembling NEC LCD1770NX Monitor Enclosure

필요한 것

  1. Disassembling NEC LCD1770NX Monitor Enclosure, Stand: 1 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure, Stand: 1 단계, 이미지 2/2
    • Place the monitor face down on a clean, flat surface.

  2. Disassembling NEC LCD1770NX Monitor Enclosure: 2 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 2 단계, 이미지 2/2
    • Firmly remove the back panel of the stand by pulling it up and away from the monitor.

  3. Disassembling NEC LCD1770NX Monitor Enclosure: 3 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 3 단계, 이미지 2/2
    • Unscrew the two 6mm Phillips PH2 screws to detach the stand enclosure from the stand.

  4. Disassembling NEC LCD1770NX Monitor Enclosure: 4 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 4 단계, 이미지 2/2
    • Firmly grasp the stand enclosure with your hand and slide it to base of stand.

  5. Disassembling NEC LCD1770NX Monitor Enclosure: 5 단계, 이미지 1/1
    • Unscrew the two 14.5mm Phillips PH2 screws holding the stand to the monitor.

  6. Disassembling NEC LCD1770NX Monitor Enclosure: 6 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 6 단계, 이미지 2/2
    • Lift the the stand straight up to remove it.

  7. Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: 7 단계, 이미지 1/3 Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: 7 단계, 이미지 2/3 Disassembling NEC LCD1770NX Monitor Enclosure, Monitor Enclosure: 7 단계, 이미지 3/3
    • Place the monitor screen face up.

    • Pull the frame off by placing your fingers on the inside of the frame and pulling out and up, the frame should snap off.

    • Continue your way around the screen.

  8. Disassembling NEC LCD1770NX Monitor Enclosure: 8 단계, 이미지 1/3 Disassembling NEC LCD1770NX Monitor Enclosure: 8 단계, 이미지 2/3 Disassembling NEC LCD1770NX Monitor Enclosure: 8 단계, 이미지 3/3
    • Unscrew the two 7mm screws from the bottom of the button assembly.

    • Do not pull the button assembly out too quickly or with too much force! Damage to the wires can occur.

    • Pull the button assembly out a few inches and unplug the colored cables.

  9. Disassembling NEC LCD1770NX Monitor Enclosure: 9 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 9 단계, 이미지 2/2
    • Unscrew the gold colored 7mm Phillips PH000 screw holding the button assembly to the monitor.

    • Remove the button assembly from the monitor.

  10. Disassembling NEC LCD1770NX Monitor Enclosure: 10 단계, 이미지 1/1
    • With the monitor face-down, unscrew the 5 7mm Phillips PH2 screws around the outside of the enclosure.

  11. Disassembling NEC LCD1770NX Monitor Enclosure: 11 단계, 이미지 1/3 Disassembling NEC LCD1770NX Monitor Enclosure: 11 단계, 이미지 2/3 Disassembling NEC LCD1770NX Monitor Enclosure: 11 단계, 이미지 3/3
    • Unscrew the 2 14.5mm Phillips PH2 screws located on the raised center of the enclosure.

    • Carefully pull the enclosure off the monitor.

  12. Disassembling NEC LCD1770NX Monitor Enclosure: 12 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 12 단계, 이미지 2/2
    • Unscrew the 10 5mm Philips PH2 screws holding the metal casing to the monitor.

  13. Disassembling NEC LCD1770NX Monitor Enclosure: 13 단계, 이미지 1/2 Disassembling NEC LCD1770NX Monitor Enclosure: 13 단계, 이미지 2/2
    • Pull the the metal casing off of the monitor to reveal the motherboards.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

John Patterson

회원 가입일: 10/19/13

253 평판

안내서 2개 작성하였습니다

Cal Poly, Team 11-36, Amido Fall 2013 Cal Poly, Team 11-36, Amido Fall 2013 회원

CPSU-AMIDO-F13S11G36

5 회원들

안내서 7개 작성하였습니다

댓글 한 개

very helpful

Thank you

Richard Morgan - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 29

전체 시간: 5,838