기기를 수리하세요 커뮤니티 상점

Door Mirror Replacement

소개

This guide will walk you through on the steps on replacing your door mirror. You will need to be careful with handling the mirror, as it could potentially shattered if not handled properly. The tools that you will need for this is just screwdriver, but a power drill can also be used.

필요한 것

  1. Door Mirror Replacement, Door Mirror: 1 단계, 이미지 1/1

    • Use a screwdriver to remove the two brackets securing the top of the mirror.

    • The mirror will fall forward once the two top brackets are released; be sure to support the mirror as you unscrew the brackets.

    • The type of screwdriver needed will depend on your specific brackets.

    번역하기

  2. Door Mirror Replacement: 2 단계, 이미지 1/1

    • Lift the broken mirror off of the door.

    • Remove any cardboard or other cushioning (if any) from the door.

    번역하기

  4. Door Mirror Replacement: 3 단계, 이미지 1/1

    • Loosen, but don't remove, the bottom brackets to accommodate the width of the new mirror.

    번역하기

  5. Door Mirror Replacement: 4 단계, 이미지 1/1

    • If you have new mirror supports, then remove the old brackets entirely and replace them with the new brackets.

    번역하기

  6. Door Mirror Replacement: 5 단계, 이미지 1/1

    • Replace any cushioning behind the mirror.

    • While supporting the top of the mirror, set the mirror into the bottom brackets, then tighten the brackets.

    번역하기

  7. Door Mirror Replacement: 6 단계, 이미지 1/1

    • Replace the top brackets and tighten them to full secure the mirror.

    번역하기
결론

Enjoy your new mirror!

작성자

다른 기여자 5명과 함께

Seth Wanderman

회원 가입일: 02/28/22

133 평판

안내서 1개 작성함

배지: 2

팀

University of Memphis, Team 2-9, Willis Spring 2022 University of Memphis, Team 2-9, Willis Spring 2022 회원

UM-WILLIS-S22S2G9

1 회원

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 21

전체 시간: 558