주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Use this guide shows to replace the slim case of your FairPhone 2.

If you still have the bumper made in one piece you maybe want to use this guide.

  1. Pick a corner of your slim case and get between the two parts with your thumb's fingernails. Pull up the back part of the slim case to separate the small snap fit connections. Remove the back part of the slim case.
    • Pick a corner of your slim case and get between the two parts with your thumb's fingernails.

    • Pull up the back part of the slim case to separate the small snap fit connections.

    • Remove the back part of the slim case.

  2. Get in between the front part of the slim case and the phone's body with your thumb nail. Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display. Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display.
    • Get in between the front part of the slim case and the phone's body with your thumb nail.

    • Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display.

  3. Remove the front part of the slim case.
    • Remove the front part of the slim case.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Tobias Isakeit

회원 가입일: 2014년 03월 31일

75,515 평판

안내서 144개 작성하였습니다

iFixit iFixit 회원

Community

129 회원들

안내서 12,929개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 27

전체 시간: 872