Front Panel Assembly Replacement - iFixit 수리 안내서

소개

This guide will walk you through how you remove the front panel assembly which contains the screen along with the front glass and capacitive buttons.

필요한 것

1 단계 Front Panel Assembly

Front Panel Assembly Replacement, Front Panel Assembly: 1 단계, 이미지 1/1

Insert the spudger under the capacitive button panel, and slide the spudger all the way around.
You will want to heat up the screen edges with the iOpener to help facilitate removal.

2 단계

Front Panel Assembly Replacement: 2 단계, 이미지 1/1

Remove the button cover by lifting the cover away from the tablet.

3 단계

Front Panel Assembly Replacement: 3 단계, 이미지 1/1

Using the Torx screwdriver, remove the 4mm screws.

4 단계

Front Panel Assembly Replacement: 4 단계, 이미지 1/1

With the Torx screwdriver, remove the two 5mm screws.

5 단계

Front Panel Assembly Replacement: 5 단계, 이미지 1/2

Front Panel Assembly Replacement: 5 단계, 이미지 2/2

Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.
With the Torx screwdriver, remove the two 4mm screws.

6 단계

Front Panel Assembly Replacement: 6 단계, 이미지 1/1

Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

7 단계

Front Panel Assembly Replacement: 7 단계, 이미지 1/2

Front Panel Assembly Replacement: 7 단계, 이미지 2/2

Ribbon cables are very sensitive and prone to breaking
Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.
Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Carlos Salas

회원 가입일: 09/30/16

188 평판

안내서 1개 작성함

배지 +7개 더

팀

USF Tampa, Team 4-6, Passmore Fall 2016 USF Tampa, Team 4-6, Passmore Fall 2016 회원

USFT-PASSMORE-F16S4G6

3 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 55