GameSir X2 Type-C Left Trigger Replacement

소개

The trigger is a button on the top of the GameSir X2 Type-C. It allows a user to produce various outputs depending on the game the user is playing.

If you need to replace the left trigger on your controller, follow this replacement guide. Possible reasons for replacing the trigger would be if it is unresponsive to input or has a lagging response. Before replacing the trigger, review Troubleshooting Page.

필요한 것

1 단계 Back Cover

GameSir X2 Type-C Left Trigger Replacement, Back Cover: 1 단계, 이미지 1/2

GameSir X2 Type-C Left Trigger Replacement, Back Cover: 1 단계, 이미지 2/2

Turn the device so the back faces you.

번역하기

2 단계

Remove the eight 6 mm T6 Torx screws.

번역하기

3 단계

Use a straight edge to remove the rubber pad on the front of the device.

번역하기

4 단계

Remove the four 4.5 mm screws with a Phillips #000 screwdriver.

번역하기

5 단계

Use a straight edge to pry open the controller, following the seam on the controller.
Some force is necessary, but be careful not to damage any of the clips holding the controller together.

번역하기