HP Spectre x360 13-4103dx Battery Replacement

소개

This guide consist of a step by step instruction on how to remove your battery, make clean tidy room with enough lighting before you start. In addition, make sure your battery actually needs to be replaced by turning to our troubleshooting guide

필요한 것

1 단계 Back Panel

HP Spectre x360 13-4103dx Battery Replacement, Back Panel: 1 단계, 이미지 1/1

Turn off your laptop before you start.
Flip your laptop so the bottom is facing upwards.

편집

2 단계

Use a Phillips #0 to remove the screws that hold the back panel down.

편집

3 단계

Use an opening tool to remove the back panel.
Be careful when applying force to the panel so the components and the panel are not damaged.
Try to start at a corner or a place with the most room to slide under the panel.

편집

4 단계 Battery

HP Spectre x360 13-4103dx Battery Replacement, Battery: 4 단계, 이미지 1/2

HP Spectre x360 13-4103dx Battery Replacement, Battery: 4 단계, 이미지 2/2

Remove the four screws from the battery using a Phillips #0 screwdriver.

편집

5 단계

Remove the battery from the computer.

편집

결론

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.