기기를 수리하세요 커뮤니티 상점

HP Spectre x360 15" (15t-ap000) Back Cover Replacement

소개

This guide shows how to remove and replace the back cover for the HP Spectre x360 15t-ap000 laptop.

필요한 것

  1. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Unscrew the back cover: 1 단계, 이미지 1/1

    • Be sure to completely power off and unplug your laptop before you begin your repair. Make sure the laptop is not in standby, sleep, or hibernation mode.

    • Use a T5 driver to remove the following screws securing the back cover:

    • Six 4 mm-long screws

    • Two 7.8 mm-long screws

    편집

  3. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: 2 단계, 이미지 1/2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: 2 단계, 이미지 2/2

    • Use an opening tool or your fingers to pry up the back cover from the laptop.

    • Plastic clips hold the back cover lightly in place, so you may encounter some resistance.

    • If it feels like there is strong resistance, you may have a model that includes screws under the corner feet. Carefully pry the feet up to make sure they don't have screws.

    편집

  4. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: 3 단계, 이미지 1/2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: 3 단계, 이미지 2/2

    • Lift and remove the back cover.

    • During reassembly, gently press along the perimeter of the back cover to re-engage the clips.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Arthur Shi

회원 가입일: 01/03/18

253,419 평판

안내서 526개 작성하였습니다

배지: 47

배지 +44개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 17,198개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 43

전체 시간: 2,339