Skip to main content
  1. Use your nail or a spudger to pry up the back cover of the device.
    • Use your nail or a spudger to pry up the back cover of the device.

  2. Slide your finger around the rest of the back cover, lifting it completely off of the device.
    • Slide your finger around the rest of the back cover, lifting it completely off of the device.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Remove all ten of the screws on the inside cover using the screwdriver with a PH00 Phillips head.
    • Remove all ten of the screws on the inside cover using the screwdriver with a PH00 Phillips head.

  5. Pry up the inside cover the same way as in the first step.
    • Pry up the inside cover the same way as in the first step.

  6. Remove the two speakers at the bottom of the device using tweezers. Remove the two speakers at the bottom of the device using tweezers.
    • Remove the two speakers at the bottom of the device using tweezers.

  7. The power wires are soldered to the board. They must be disconnected, and the replacement speakers re-soldered.
    • The power wires are soldered to the board. They must be disconnected, and the replacement speakers re-soldered.

    • For soldering help, check out iFixit's How to Solder and Desolder Connections guide.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nick Miller

회원 가입일: 2016년 04월 11일

666 평판

안내서 6개 작성하였습니다

Cal Poly, Team 34-14, Maness Spring 2016 Cal Poly, Team 34-14, Maness Spring 2016 회원

CPSU-MANESS-S16S34G14

4 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 190