주요 콘텐츠로 건너뛰기

HP x2 10-p010wm Speaker Replacement

필요한 것

  1. HP x2 10-p010wm Speaker Replacement, Battery: 1 단계, 이미지 1/1
    • Pull the screen away from the keyboard.

  2. HP x2 10-p010wm Speaker Replacement: 2 단계, 이미지 1/2 HP x2 10-p010wm Speaker Replacement: 2 단계, 이미지 2/2
    • Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.

  3. HP x2 10-p010wm Speaker Replacement: 3 단계, 이미지 1/1
    • Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.

    • Do not pull up too hard; slowly slide it towards the screen.

  4. HP x2 10-p010wm Speaker Replacement: 4 단계, 이미지 1/1
    • Remove the eight 4mm Phillips #00 screws from the metal plate.

  5. HP x2 10-p010wm Speaker Replacement: 5 단계, 이미지 1/3 HP x2 10-p010wm Speaker Replacement: 5 단계, 이미지 2/3 HP x2 10-p010wm Speaker Replacement: 5 단계, 이미지 3/3
    • Slowly peel up any tape securing the wire to the metal cover.

    • Remove the metal cover to access the battery.

  6. HP x2 10-p010wm Speaker Replacement: 6 단계, 이미지 1/1
    • Remove the 4mm screw on the side.

  7. HP x2 10-p010wm Speaker Replacement: 7 단계, 이미지 1/1
    • Remove the black tape.

    • Pull the battery connector towards the battery to disconnect it from its socket.

  8. HP x2 10-p010wm Speaker Replacement: 8 단계, 이미지 1/1
    • Remove the battery.

  9. HP x2 10-p010wm Speaker Replacement, Speaker: 9 단계, 이미지 1/2 HP x2 10-p010wm Speaker Replacement, Speaker: 9 단계, 이미지 2/2
    • Remove speakers on both sides.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nathan Ojala

회원 가입일: 10/30/19

317 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team S4-G3, Saloman Fall 2019 UMass Dartmouth, Team S4-G3, Saloman Fall 2019 회원

UMASSD-SALOMAN-F19S4G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 9

전체 시간: 171