기기를 수리하세요 커뮤니티 상점

Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement

소개

The Wi-Fi card provides a wireless connection to a network. If it fails, you may be left with no other option to connect the tablet to the internet.

필요한 것

  1. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Back Panel: 1 단계, 이미지 1/1

    • Place the tablet screen side up.

    • Make sure the device is turned off to avoid damage.

    편집

  2. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 2 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 2 단계, 이미지 2/2

    • Use the metal spudger to press an opening between the screen and back cover.

    • The plastic tabs are located on each corner of the back cover.

    • Be careful, as the plastic tabs are delicate.

    편집

  3. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 3 단계, 이미지 1/1

    • Wedge the plastic opening tool between the screen and the back panel to prevent re-engagement

    편집

  4. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 4 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 4 단계, 이미지 2/2

    • Slide the metal spudger around the casing to separate it from the inside of the tablet.

    편집

  5. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 5 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 5 단계, 이미지 2/2

    • Flip the tablet over so the screen side is down after all the tabs are separated.

    • Remove the back panel by delicately lifting it straight up.

    편집

  7. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Battery: 6 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Battery: 6 단계, 이미지 2/2

    • Remove the adhesive tape from the power connection cables.

    편집

  8. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 7 단계, 이미지 1/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 7 단계, 이미지 2/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 7 단계, 이미지 3/3

    • Instructions for desoldering can be found on the iFixit website.

    • The soldering iron is hot. It can burn you and it can cause damage to the wires and motherboard.

    • Grab hold of the red wire using the tweezers.

    • Desolder the red wire connection from the motherboard using the tip of the soldering iron.

    • Move the wire connection away from the motherboard.

    • Do not let the red wire connection touch other wires or the motherboard.

    편집

  9. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 8 단계, 이미지 1/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 8 단계, 이미지 2/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 8 단계, 이미지 3/3

    • Desolder the black and yellow wire connection from the motherboard by following the previous step.

    • When moving the wire connections, do not let the red wire connection touch other wires or the motherboard.

    편집

  10. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 9 단계, 이미지 1/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 9 단계, 이미지 2/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 9 단계, 이미지 3/3

    • Insert the flat end of the nylon spudger between the battery and the case.

    • The battery is connected to the tablet with an adhesive tape and will come free slowly.

    • Do not puncture or bend the battery while removing. If your battery is swollen, take appropriate precautions.

    편집

  11. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement, Wi-Fi Card Replacement: 10 단계, 이미지 1/1

    • Identify the card and its connection to the motherboard.

    • The card itself.

    • The area where the card connects to the motherboard.

    편집

  12. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 11 단계, 이미지 1/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 11 단계, 이미지 2/3 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 11 단계, 이미지 3/3

    • Peel off the adhesive tape holding the wires down.

    편집

  13. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 12 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 12 단계, 이미지 2/2

    • Desolder the wire.

    편집

  14. Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 13 단계, 이미지 1/2 Hannspree Hannspad SN1AT71 Wi-Fi Card Replacement: 13 단계, 이미지 2/2

    • Use the tweezers to peel the Wi-Fi card off.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

matthew vandeventer

회원 가입일: 03/11/15

950 평판

안내서 5개 작성하였습니다

배지: 20

배지 +17개 더

팀

Colorado Springs, Team 9-4, Panko Spring 2015 Colorado Springs, Team 9-4, Panko Spring 2015 회원

UCCS-PANKO-S15S9G4

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 700