기기를 수리하세요 커뮤니티 상점

Hipstreet Equinox 2 Motherboard Replacement

소개

If your motherboard gets broken by a bad fall or damage while replacing another part it will need to be replaced. Please note that all data is on the motherboard so you will lose your data.

필요한 것

  1. Hipstreet Equinox 2 Motherboard Replacement, Rear Case: 1 단계, 이미지 1/1

    • Remove the two 3mm screws using a PH00 screwdriver.

    편집

  2. Hipstreet Equinox 2 Motherboard Replacement: 2 단계, 이미지 1/1

    • Use the blue plastic opening tool to gently pry the back case off.

    편집

  4. Hipstreet Equinox 2 Motherboard Replacement, Motherboard: 3 단계, 이미지 1/1

    • Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

    편집

  5. Hipstreet Equinox 2 Motherboard Replacement: 4 단계, 이미지 1/1

    • Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

    편집

  6. Hipstreet Equinox 2 Motherboard Replacement: 5 단계, 이미지 1/1

    • Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

    편집

  7. Hipstreet Equinox 2 Motherboard Replacement: 6 단계, 이미지 1/1

    • Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Brandon Snodgrass

회원 가입일: 01/29/15

410 평판

안내서 4개 작성하였습니다

배지: 6

배지 +3개 더

팀

Clemson, Team 15-8, Shirley Winter 2015 Clemson, Team 15-8, Shirley Winter 2015 회원

CLEM-SHIRLEY-W15S15G8

5 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 354