주요 콘텐츠로 건너뛰기

Hipstreet Equinox 2 Speaker Replacement

필요한 것

  1. Hipstreet Equinox 2 Speaker Replacement, Rear Case: 1 단계, 이미지 1/1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Speaker Replacement: 2 단계, 이미지 1/1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Speaker Replacement, Speaker: 3 단계, 이미지 1/1
    • Use a plastic opening tool to remove the speakers from the case.

    • Desolder the wires from the motherboard.

    • Be sure to note which wire, red or black, corresponds to which connection on the motherboard.

  4. Hipstreet Equinox 2 Speaker Replacement: 4 단계, 이미지 1/1
    • Solder the wires of the new speaker to the motherboard as shown in the image.

  5. Hipstreet Equinox 2 Speaker Replacement: 5 단계, 이미지 1/1
    • Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Joel Miller

회원 가입일: 01/29/15

119 평판

안내서 1개 작성함

Clemson, Team 15-8, Shirley Winter 2015 Clemson, Team 15-8, Shirley Winter 2015 회원

CLEM-SHIRLEY-W15S15G8

5 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 199